sensor EPM

รายละเอียดสินค้า

End discharge detection and temperature detection of genuine grease

仕様

Contact configuration	B contact
Rated Voltage	DC3～DC24V
Rated current	5mA
Used Grease	LHL- X100
Operating envIronment temperature	0℃～40℃
standard	IP67 (Get planned), RoHS2
Mounting Directions	No limit
Used grease piping length	NT-4, NT-4H, ST-4Z, CT-4 Length 2000 mm or less
Connected metering valve	MU valve (Discharge Amount 0.05 to 0.5 ml)
Connection screw diameter	M6 × 0.75 taper, M6 × 1 taper, M8 × 1.25 taper, R1 / 8 (Use as a swivel joint is not possible)
Piping connection port	One-touch type, bushing (using CB-4)
wiring	Exterior PVCφ 5.2 Length 2500 mm, 4 wires (for contacts, for thermocouples) Minimum bending radius 30 mm (M8 connector included)
Built-in temperature sensor	K-type thermocouple
Temperature measurement range	0℃～90℃

Model indication method

Dimensional Drawing

EPM

Model	Part Number	lubricant	Screw Size
EPM-L-01-W-2.5-C	420100	LHL W	R1/8
EPM-L-02-W-2.5-C	420101		M6×0.75 taper
EPM-L-03-W-2.5-C	420102		M6×1.0 taper
EPM-L-04-W-2.5-C	420103		M8×1.25 taper
EPM-L-01-B-2.5-C	420104		R1/8
EPM-L-02-B-2.5-C	420105		M6×0.75 taper
EPM-L-03-B-2.5-C	420106		M6×1.0 taper
EPM-L-04-B-2.5-C	420107		M8×1.25 taper
EPM-L-01-W-2.5	420110	LHL W	R1/8
EPM-L-02-W-2.5	420111		M6×0.75 taper
EPM-L-03-W-2.5	420112		M6×1.0 taper
EPM-L-04-W-2.5	420113		M8×1.25 taper
EPM-L-01-B-2.5	420114	LHL B	R1/8
EPM-L-02-B-2.5	420115		M6×0.75 taper
EPM-L-03-B-2.5	420116		M6×1.0 taper
EPM-L-04-B-2.5	420117		M8×1.25 taper
EPM-H-01-W-2.5-C	420200	FS2-W	R1/8
EPM-H-02-W-2.5-C	420201		M6×0.75 taper
EPM-H-03-W-2.5-C	420202		M6×1.0 taper
EPM-H-04-W-2.5-C	420203		M8×1.25 taper
EPM-H-01-B-2.5-C	420204	FS2-B	R1/8
EPM-H-02-B-2.5-C	420205		M6×0.75 taper
EPM-H-03-B-2.5-C	420206		M6×1.0 taper
EPM-H-04-B-2.5-C	420207		M8×1.25 taper
EPM-H-01-W-2.5	420210	FS2-W	R1/8
EPM-H-02-W-2.5	420211		M6×0.75 taper
EPM-H-03-W-2.5	420212		M6×1.0 taper
EPM-H-04-W-2.5	420213		M8×1.25 taper
EPM-H-01-B-2.5	420214	FS2-B	R1/8
EPM-H-02-B-2.5	420215		M6×0.75 taper
EPM-H-03-B-2.5	420216		M6×1.0 taper
EPM-H-04-B-2.5	420217		M8×1.25 taper
EPM-O-01-W-2.5-C	420300	OIL-W	R1/8
EPM-O-02-W-2.5-C	420301		M6×0.75 taper
EPM-O-03-W-2.5-C	420302		M6×1.0 taper
EPM-O-04-W-2.5-C	420303		M8×1.25 taper
EPM-O-01-B-2.5-C	420304	OIL-B	R1/8
EPM-O-02-B-2.5-C	420305		M6×0.75 taper
EPM-O-03-B-2.5-C	420306		M6×1.0 taper
EPM-O-04-B-2.5-C	420307		M8×1.25 taper
EPM-O-01-W-2.5	420310	OIL W	R1/8
EPM-O-02-W-2.5	420311		M6×0.75 taper
EPM-O-03-W-2.5	420312		M6×1.0 taper
EPM-O-04-W-2.5	420313		M8×1.25 taper
EPM-O-01-B-2.5	420314	OIL B	R1/8
EPM-O-02-B-2.5	420315		M6×0.75 taper
EPM-O-03-B-2.5	420316		M6×1.0 taper
EPM-O-04-B-2.5	420317		M8×1.25 taper